ESM-WSC White Static Cling
This 7 mil white static cling is specifically formulated for eco-solvent ink printing. ESM-WSC is a self-clinging white film which requires no adhesive, applies quickly to glass and most smooth polished surfaces and is easily removed. Compatible with Eco-Sol MAX inks, the product is an excellent alternative to adhesive-backed and other less capable static cling products. Compatible with Roland SOLJET, VersaArt, VersaCAMM, VersaStudio, TrueVIS and VersaUV printers.
|Specifications.BasisWeight||62# per MSI|
|Specifications.Inkset||Eco solvent (Eco-Sol MAX, Eco-Sol MAX 2, EJ, TrueVIS), ECO-UV|
|Specifications.Adhesive||None adhesive, static cling vinyl|
|Specifications.Backing||10 pt. cast coated board|
- POP Displays
- Tradeshow Graphics
- Window Graphics
Saklama ve Kullanım
Static cling material should be handled with care before and after printing to prevent surface contamination that may spoil the print. The material should be processed in an environment of 65°-85° F (18°-30°C) and 50-75% relative humidity (non-condensing) that is clean and relatively dust-free. Also, some media are affixed strongly to the core and care should be taken to avoid machine issues due to the non-release of media at the end of the roll. Store this product in its original packaging in a cool dry area until ready for processing. If storage conditions are outside the recommended operating ranges, allow the paper to acclimate in the specified range for at least 24-48 hours before use.
These graphics can be installed by experienced and inexperienced installers, shop and retail store employees. This material is dimentionally stable, water-resistant, and highly scratch resistant. It does not require lamination. Care should be taken to allow this product to fully cure before packaging for delivery or preparing for installation.