MDX-40A Teknik Özellikler

MODEL MDX-40A
Uygulanabilir malzeme  Kimyasal hap ve modelleme mumu gibi reçineler (metal desteklenmiyor), makinede ileme için tabakalar.
X, Y ve Z çalıma aralıkları 12 (X) x 12 (Y) x 4-1/8 (Z) in.
(305 (X) x 305 (Y) x 105 (Z) mm)
Pens ucu ile tezgah arasındaki mesafe Maksimum 123 mm
Tezgah boyutu 12 (W) x 12 (D) in.
(305 (W) x 305 (D) mm)
Yüklenebiliri parçası agırlıgı 8.8 lb (4 kg)
X, Y, ve Z ekseni sürücü sistemi/td> Adımlı motor
Besleme değeri XY-axis: 0.0039 to 1.9 in./s (0.1 to 50 mm/sec.),
Z-axis: 0.0039 to 1.1 in./s (0.1 to 30 mm/sec.)
Mekanik çözünürlügü NC-code: 0.000039 in./step (0.001mm/step),
RML-1: 0.00039 in./step (0.01 mm/step)(RML-1)
Mekanik çözünürlügü 0.00008 in./step (0.002 mm/step)(Micro-step)
Mil motoru DC motoru, Maksimum 100W
Spindle rotation 4500 to 15000 rpm
Kesme aleti tutma vidası Pens yöntemi
Arayüz USB
Güç Voltage and frequency  AC100 to 240 +/-10%, 50/60 Hz
Required power capacity 2.1 A
Güç tüketimi Yaklaşık 210W
Gürültü seviyesi Çalışma sırasında 56 dB (A) Standby 42 dB (A)
Boyutlars 26-3/8 (W) x 29-15/16 (D) x 21-13/16 (H) in.
669 (W) x 760 (D) x 554 (H) mm
Ağırlık 143.3 lb (65 kg)
Kurulum ortamı 41 to 104°F (5 to 40°C)
Kurulum ortamı  Sıcaklık 5 ila 40°C, (41 ila 104 °F), %35 ila 80 bagıl nem (yogumasız)
Aksesuarlar  Güç kablosu, USB kablosu, pens (ZC-23-6), Z0 sensör, altıgenal anahtar, altıgen tornavida, ingiliz anahtarları, kullanım klavuzu, SRP Player kurulumu ve yükleme rehberi.
Software Sistem Gereksinimleri
OS Windows Vista®(32-bit) veya Windows® XP(32-bit)*2 ve Internet Explorer 6.0 veya daha sonra
CPU Pentium® 4, 2.4GHz veya üstü önerilir
Bellek RAM 1GB veya üstü önerilir (2GB veya üstü önerilir recommended for Windows Vista®)
Free hard-disk space 20MB or more recommended
Video card and monitor 1024 x 768 veya daha fazla çözünürlük önerilir - 16-bit
Optional Rotary Axis Unit (ZCL-40A)
Maximum angle of rotation +/-18 x 105° (+/-5000 rotations)
Maximum loadable workpiece size* 4.7 in.(120 mm) diameter by 10.6 in. (270 mm) long
Maximum thickness holdable by workpiece clamp 0.4 to 1.8 in. (10 to 45 mm)
Loadable workpiece weight 2.2 lb (1kg ) (including clamps)
Feed rate 0.23-11.79 rpm
Mechanical resolution 0.005625 deg./step (Micro-step)
Dimensions 18.5 (W) x 11.3 (D) x 4.5 (H) in.
(470 (W) x 286 (D) x 115 (H) mm)
Weight 16.5 lb (7.5 kg)
Included items Y-origin sensors (large and small), Z-origin sensor, Y-origin detection pin, center drill, live center, hexagonal wrench, cap
*The range that can actually be cut is limited by the amount of tool extention and interference between the loaded workpiece
Optional 3D Scanning Sensor Unit (ZSC-1)
Maximum scanning area 12.0 (X) x 12.0 (Y) x 2.3 (Z) in.
(305 (X) x 305 (Y) x 60 (Z) mm)
Distance from probe tip to table Maximum 3.6 in. (92.4 mm)
Table load capacity Maximum 8.8 lb (4 kg)
Sensor Type Roland Active Piezo Sensor (RAPS)
Effective Probe Length 2-5/16 in. (60 mm)
Tip Bulb Radius 0.00315 in. (0.08 mm)
Minimum scan pitch .002 in (.051 mm)
Scanning method Contacting, mesh-point height-sensing
Operating speed XY-axis 0.6 to 1.1 in./s (15 to 30 mm/sec.)
Z-axis 0.04 to 1.1 in./s (1 to 30 mm/sec.)
Item Model Description
Rotary axis unit ZCL-40A See the above specifications
3D Scanning sensor unit ZSC-1 See the above specifications
Replacement spindle unit ZS-40 1GB or more recommended
Dust box ZDX-40 26.33(W) x 30.27(D) x 3.8(H) in.
(666 (W) x 769 (D) x 97 (H) mm)